CC2640R2F Datasheet, PDF (21/64 Pages) Texas Instruments – SimpleLink Bluetooth low energy Wireless MCU

www.ti.com
CC2640R2F
SWRS204 – DECEMBER 2016
2-Mbps GFSK (Bluetooth 5) – RX (continued)
Measured on the TI CC2650EM-5XD reference design with T_c = 25°C, V_DDS = 3.0 V, f_RF = 2440 MHz, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Selectivity, ±4 MHz⁽¹⁾
Wanted signal at –67 dBm, modulated interferer at
±4 MHz, BER = 10^–3
31 / 26⁽²⁾
dB
Selectivity, ±6 MHz⁽¹⁾
Wanted signal at –67 dBm, modulated interferer at
±6 MHz, BER = 10^–3
37 / 38⁽²⁾
dB
Alternate channel rejection,
±7 MHz⁽¹⁾
Wanted signal at –67 dBm, modulated interferer at
≥ ±7 MHz, BER = 10^–3
37 / 36⁽²⁾
dB
Selectivity, image frequency⁽¹⁾
Wanted signal at –67 dBm, modulated interferer at
image frequency, BER = 10^–3
4
dB
Selectivity, image frequency
±2 MHz⁽¹⁾
Out-of-band blocking⁽³⁾
Note that Image frequency + 2 MHz is the Co-channel.
Wanted signal at –67 dBm, modulated interferer at
±2 MHz from image frequency, BER = 10^–3
30 MHz to 2000 MHz
–7 / 26⁽²⁾
–33
dB
dBm
Out-of-band blocking
2003 MHz to 2399 MHz
–15
dBm
Out-of-band blocking
2484 MHz to 2997 MHz
–12
dBm
Out-of-band blocking
3000 MHz to 12.75 GHz
–10
dBm
Intermodulation
Wanted signal at 2402 MHz, –64 dBm. Two interferers
at 2405 and 2408 MHz respectively, at the given power
level
–45
dBm
(3) Excluding one exception at F_wanted / 2, per Bluetooth Specification.
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC2640R2F
Specifications
21