DS92LV1260_14 Datasheet, PDF (2/21 Pages) Texas Instruments – Six Channel 10 Bit BLVDS Deserializer

DS92LV1260
SNLS134F – DECEMBER 2000 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_cc)
Bus LVDS Input Voltage (Rin +/-)
Maximum Package Power Dissipation @25°C
Package Thermal Resistance
θ_JA 196 NFBGA:
θ_JC 196 NFBGA:
Storage Temp. Range
Junction Termperature
Lead Temperature (Soldering 10 Sec)
ESD Rating:
Human Body Model
Machine Model
Reliability Information
Transistor Count
-0.3 to 4V
-0.3V to 3.9V
3.7W
34°C/W
8°C/W
-65°C to +150°C
+150°C
+225°C
>3KV
>750V
35,682
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air
Temperature (T_A)
Operating Frequency
3.0V to 3.6V
-40°C to +85°C
16-40 MHz
Electrical Characteristics⁽¹⁾
Basic functionality and specifications per deserializer channel will be similar to DS92LV1212A. Over recommended operating
supply and termperature ranges unless otherwise specified.⁽²⁾
Parameter
Test Conditions
Pin/Freq.
Min Typ Max Units
LVCMOS/LVTTL DC Specifications:
V_IH
High Level Input Voltage
2.0
V_CC
V
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
REN,REFCLK,PWRDWN, ^GND
0.8
V
SEL (0:2),R_OUT
-0.87 -1.5
V
I_IN
Input Current
V_in = 0 or 3.6V
-10
+10
uA
V_OH
High Level Output Voltage
I_OH = -6mA
2
3
V_CC
V
V_OL
Low Level Output Voltage
I_OL = 6mA
R_out,
I_OS
Output short Circuit Current V_out = 0V,⁽³⁾
RCLK,
LOCK
I_OZ
TRI-STATE Output Current
PWRDWN or REN = 0.8V,
V_out = 0V or V_CC
GND 0.18 0.4
V
-15
-46 -85
mA
-10 +/-0.2 +10
uA
(1) Current into the device pins is defined as positive. Current out of device pins is defined as negative. Voltage are referenced to ground
except VTH and VTL which are differential voltages.
(2) Typical values are given for Vcc = 3.3V and TA =25°C
(3) Only one output should be shorted at a time. Do not exceed maximum package power dissipation capacity.
2
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS92LV1260