DAC8551IADGKRG4 Datasheet, PDF (2/26 Pages) Texas Instruments – 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT

DAC8551
SLAS429B – APRIL 2005 – REVISED OCTOBER 2006
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
PACKAGING/ORDERING INFORMATION⁽¹⁾
PRODUCT
MAXIMUM
RELATIVE
ACCURACY
(LSB)
MAXIMUM
DIFFERENTIAL
NONLINEARITY
(LSB)
MAXIMUM
GAIN ERROR
(% OF FSR)
PACKAGE
LEAD
PACKAGE
DESIGNATOR
DAC8551
±8
±1
±0.15
MSOP-8
DGK
DAC8551A
±12
±1
±0.2
MSOP-8
DGK
SPECIFIED
TEMPERATURE
RANGE
–40°C to +105°C
–40°C to +105°C
PACKAGE
MARKING
D81
D81
ORDERING
NUMBER
DAC8551IDGK
DAC8551IDGKT
DAC8551IDGKR
DAC8551IADGK
DAC8551IADGKT
DAC8551IADGKR
TRANSPORT
MEDIA, QUANTITY
Tube, 80
Tape and Reel, 250
Tape and Reel, 2500
Tube, 80
Tape and Reel, 250
Tape and Reel, 2500
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or see the TI
website at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
V_DD to GND
Digital input voltage to GND
V_OUT to GND
Operating temperature range
Storage temperature range
Junction temperature range (T_J max)
Power dissipation (DGK)
Thermal impedance
θ_JA
θ_JC
UNIT
–0.3V to 6V
–0.3V to +V_DD + 0.3V
–0.3V to +V_DD + 0.3V
–40°C to +105°C
–65°C to +150°C
+150°C
(T_J max – T_A)/θ_JA
206°C/W
44°C/W
(1) Stresses above those listed under absolute maximum ratings may cause permanent damage to the device. Exposure to absolute
maximum conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
V_DD = 2.7V to 5.5V,and –40°C to +105°C range, unless otherwise noted.
PARAMETER
TEST CONDITIONS
STATIC PERFORMANCE⁽¹⁾
Resolution
Relative accuracy
Measured by line passing through
codes 485 and 64741
DAC8551
DAC8551A
Differential nonlinearity
16-bit monotonic
Zero-code error
Full-scale error
Measured by line passing through codes 485 and 64741
Gain error
Measured by line passing through
codes 485 and 64741
DAC8551
DAC8551A
Zero-code error drift
Gain temperature coefficient
PSRR Power-supply rejection ratio
R_L = 2kΩ, C_L = 200pF
(1) Linearity calculated using a reduced code range of 485 to 64741; output unloaded.
MIN
TYP
MAX
UNIT
16
Bits
±3
±8
LSB
±3
±12
LSB
±0.25
±1
LSB
±2
±12
mV
±0.05
±0.5 % of FSR
±0.02 ±0.15 % of FSR
±0.02
±0.2 % of FSR
±5
µV/°C
±1
ppm of
FSR/°C
0.75
mV/V
2
Submit Documentation Feedback