AM1705 Datasheet, PDF (32/155 Pages) Texas Instruments – AM1705 ARM Microprocessor

AM1705
SPRS657 – FEBRUARY 2010
5 Device Operating Conditions
www.ti.com
5.1 Absolute Maximum Ratings Over Operating Junction Temperature Range
(Unless Otherwise Noted) ⁽¹⁾
Supply voltage ranges
Input voltage ranges
Core
(CVDD, RVDD, PLL0_VDDA , USB0_VDDA12⁽²⁾) ⁽³⁾
I/O, 1.8V
(USB0_VDDA18) ⁽³⁾
I/O, 3.3V
(DVDD, USB0_VDDA33) ⁽³⁾
V_I I/O, 1.2V
(OSCIN)
V_I I/O, 3.3V
(Steady State)
V_I I/O, 3.3V
(Transient)
V_I I/O, USB 5V Tolerant Pins:
(USB0_DM, USB0_DP)
Output voltage ranges
V_I I/O, USB0 VBUS
V_O I/O, 3.3V
(Steady State)
V_O I/O, 3.3V
(Transient Overshoot/Undershoot)
Clamp Current
Input or Output Voltages 0.3V above or below their respective power
rails. Limit clamp current that flows through the I/O's internal diode
protection cells.
Storage temperature range, T_stg
Operating Junction Temperature ranges,
T_J
(default)
Commercial (default)
Industrial (D version)
Extended (A version)
-0.5 V to 1.4 V
-0.5 V to 2 V
-0.5 V to 3.8V
-0.3 V to CVDD + 0.3V
-0.3V to DVDD + 0.3V
DVDD + 20%
up to 20% of Signal
Period
5.25V ⁽⁴⁾
5.50V ⁽⁴⁾
-0.5 V to DVDD + 0.3V
20% of DVDD for up to
20% of the signal period
±20mA
-55°C to 150°C
0°C to 90°C
-40°C to 90°C
-40°C to 105°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) This pin is an internal LDO output and connected via 0.22 µF capacitor to VSS
(3) All voltage values are with respect to VSS, PLL0_VSSA, OSCVSS
(4) Up to a max of 24 hours.
32
Device Operating Conditions
Submit Documentation Feedback
Product Folder Link(s): AM1705
Copyright © 2010, Texas Instruments Incorporated