|
AM1705 Datasheet, PDF (111/155 Pages) Texas Instruments – AM1705 ARM Microprocessor | |||
|
◁ |
AM1705
www.ti.com
SPRS657 â FEBRUARY 2010
6.19 Enhanced Capture (eCAP) Peripheral
The device contains up to three enhanced capture (eCAP) modules. Figure 6-35 shows a functional block
diagram of a module.
Uses for ECAP include:
⢠Speed measurements of rotating machinery (e.g. toothed sprockets sensed via Hall sensors)
⢠Elapsed time measurements between position sensor triggers
⢠Period and duty cycle measurements of Pulse train signals
⢠Decoding current or voltage amplitude derived from cuty cycle encoded current/voltage sensors
The ECAP module described in this specification includes the following features:
⢠32 bit time base
⢠4 event time-stamp registers (each 32 bits)
⢠Edge polarity selection for up to 4 sequenced time-stamp capture events
⢠Interrupt on either of the 4 events
⢠Single shot capture of up to 4 event time-stamps
⢠Continuous mode capture of time-stamps in a 4 deep circular buffer
⢠Absolute time-stamp capture
⢠Difference mode time-stamp capture
⢠All the above resources are dedicated to a single input pin
The eCAP modules are clocked at the SYSCLK2 rate.
Copyright © 2010, Texas Instruments Incorporated
Peripheral Information and Electrical Specifications 111
Submit Documentation Feedback
Product Folder Link(s): AM1705
|
▷ |