AM1705_1004 Datasheet, PDF (27/155 Pages) Texas Instruments – AM1705 ARM Microprocessor

AM1705
www.ti.com
SPRS657A – FEBRUARY 2010 – REVISED APRIL 2010
3.6.17 General-Purpose IO Only Terminal Functions
Table 3-19. General-Purpose IO Only Terminal Functions
SIGNAL NAME
GP7[14] ⁽¹⁾
PIN NO
PTP
157
TYPE
I/O
PULL
IPD
DESCRIPTION
General-Purpose IO signal.
(1) GP7[14] is initially configured as a reserved function after reset and will not be in a predictable state. This signal will only be stable after
the GPIO configuration for this pin has been completed. Users should carefully consider the system implications of this pin being in an
unknown state after reset.
3.6.18 Reserved and No Connect
Table 3-20. Reserved and No Connect Terminal Functions
SIGNAL NAME
RSV2
RSV3
RSV4
NC
NC
(1) PWR = Supply voltage.
PIN NO
PTP
133
149
148
136
139
TYPE ⁽¹⁾
PWR
PWR
I
-
-
DESCRIPTION
Reserved. For proper device operation, this pin must be tied directly to
CV_DD.
Reserved. For proper device operation, this pin must be tied directly to
CV_DD.
Reserved. This pin may be tied high or low.
No Connect (leave unconnected)
No Connect (leave unconnected)
Copyright © 2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): AM1705
Device Overview
27