MSP430F2619S-HT Datasheet, PDF (1/90 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2619S-HT
www.ti.com
SLAS697B – MARCH 2010 – REVISED JUNE 2011
MIXED SIGNAL MICROCONTROLLER
Check for Samples: MSP430F2619S-HT
FEATURES
1
•2 Low Supply Voltage Range 1.8 V to 3.6 V
• Ultralow-Power Consumption
– Active Mode: 365 μA at 1 MHz, 2.2 V
– Standby Mode (VLO): 0.5 μA
– Off Mode (RAM Retention): 0.1 μA
• Wake-Up From Standby Mode in Less than 1
μs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Three-Channel Internal DMA
• 12-Bit Analog-to-Digital (A/D) Converter With
Internal Reference, Sample-and-Hold, and
Autoscan Feature
• Dual 12-Bit Digital-to-Analog (D/A) Converters
With Synchronization
• 16-Bit Timer_A With Three Capture/Compare
Registers
• 16-Bit Timer_B With Seven
Capture/Compare-With-Shadow Registers
• On-Chip Comparator
• Four Universal Serial Communication
Interfaces (USCIs)
– USCI_A0 and USCI_A1
– Enhanced UART Supporting
Auto-Baud-Rate Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1
– I²C™
– Synchronous SPI
• Supply Voltage Supervisor/Monitor With
Programmable Level Detection
• Brownout Detector
• Bootstrap Loader
• Serial Onboard Programming, No External
Programming Voltage Needed Programmable
Code Protection by Security Fuse
• MSP430F2619S
120 kB + 256 B Flash Memory, 4 kB RAM
• Available in 64-Pin QFP and KDG Packages
• For Complete Module Descriptions, Refer to
the MSP430x2xx Family User's Guide
(SLAU144)
SUPPORTS EXTREME TEMPERATURE
APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
• Texas Instruments high temperature products
utilize highly optimized silicon (die) solutions
with design and process enhancements to
maximize performance over extended
temperatures.
DESCRIPTION
The MSP430F2619S ultralow-power microcontroller features different sets of peripherals targeted for various
applications. The architecture, combined with five low power modes, is optimized to achieve extended battery life
in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and
constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows
wake-up from low-power modes to active mode in less than 1 μs.
The MSP430F2619S is a microcontroller configuration with two built-in 16-bit timers, a fast 12-bit A/D converter,
a comparator, dual 12-bit D/A converters, four universal serial communication interface (USCI) modules, DMA,
and up to 64 I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then
process the data for display or for transmission to a host system. Stand-alone RF sensor front end is another
area of application.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated