408-8788 Datasheet, PDF (9/13 Pages) TE Connectivity Ltd – EBC-440 46-Way

Terminal Extraction Continued -
4 ^{If the wires are wrapped, remove the wrap.}
408-8788
5 Grasp the wire of the terminal to be removed.
Insert the tip of a small pick or similar tool under
the locking latch of the terminal to be removed;
then simultaneously lift the latch away from the
terminal and gently pull the wire until the
terminal is out of the connector.
NOTE
i
The terminal latch for the 2.8mm terminal
is located deeper in the circuit cavity than
for the 0.64mm or 6.3mm terminals.
Tip of Tool
0.64mm Terminal
Terminal
Locking Latch
2.8mm Terminal
Tip of Tool
6.3mm Terminal
Terminal
Locking Latch
Terminal
Locking Latch
Tip of Tool
Rev D
9 of 13