408-8788 Datasheet, PDF (5/13 Pages) TE Connectivity Ltd – EBC-440 46-Way

Mating
1 Align the polarization slot(s) of the connector
with the polarization rib(s) of the module. The
polarization slot(s) could be in any of the four
corners of the connector.
CAUTION
DO NOT try to force a connector and a
module together that have non-corresponding
polarization slot(s) and rib(s).
!
NOTE
i
A dual polarization slot connector will mate
to a single polarization rib module having a
rib in a corresponding location to a slot on
the connector.
2 Push the connector straight onto the module
until the pre-latch feature engages the cam
lobe of the module.
408-8788
Polarization
Slot of
Connector
Polarization Rib
of Module
Push Connector Straight
Pre-Latch
Feature
3 While maintaining downward pressure on
the connector, rotate the cam lever past the
cam lever lock of the wire cover until there is
an audible “click.” The cam lever is now in
the locked position (mated).
Rev D
Cam Lever
Lock
Module
Cam Lobe
Rotate
Cam Lever
5 of 13