408-8788 Datasheet, PDF (12/13 Pages) TE Connectivity Ltd – EBC-440 46-Way

408-8788
Cam Lever Replacement Continued -
6 Gently spread the arms of the cam lever
apart until they clear the detents; then slide
the back of the cam lever under the cam
lever lock.
Cam Lever Arms
7 Position the hole of one arm of the cam lever
over the detent, and gently press the arm until
there is an audible “click.” The detent must
protrude through the hole. If not, reposition the
hole over the detent, and try again.
Hole Over Detent
Cam Lever Lock
Rev D
Detent Protruding
Through Hole
Continued -
12 of 13