408-8788 Datasheet, PDF (13/13 Pages) TE Connectivity Ltd – EBC-440 46-Way

Cam Lever Replacement Continued -
8 To ensure proper installation, check for the
following:
– both slide blocks remained aligned with
the body of the connector
– the back of the cam lever is under the
cam lever lock (as shown in Step 1)
Slide Blocks
408-8788
– the cam lever rotates from the shipping
position (unmated) to the locked position
(mated)
Cam Lever in Locked Position (Mated)
If any of these features are not as stated,
repeat the cam lever replacement procedure.
Repair
The connector and wire cover are not
repairable. DO NOT use defective or
damaged products. DO NOT re-use any
terminals by removing the wire.
Rev D
13 of 13