D-6021 Datasheet, PDF (7/14 Pages) TE Connectivity Ltd – Multiplex DataBus Box Couplers and Terminators Connectorized with D-6025 Connector Interface

MIL-STD-1553B Multiplex DataBus Box Couplers and
Terminators Connectorized with D-6025 Connector
Interface
D-6021
Revision A1
25-Mar-15
3.8 Workmanship
Box couplers and terminators shall be processed in such a manner as to be consistent in
quality; they shall be free from defects that would adversely affect life, performance or
appearance.
4.0 Quality Assurance Provisions
4.1 Responsibility for Inspection. The supplier is responsible for the performance of all
inspection tests specified herein. The supplier may utilize his own or any other suitable
testing facility. Inspection records of the tests shall be kept complete and available to the
buyer as specified in the contract or order.
4.1.1
Test Equipment and Inspection Facilities. Test and measuring equipment and
inspection facilities of sufficient accuracy, quality, and quantity to permit
performance of the required inspection shall be established and maintained by the
supplier. A calibration system to control the accuracy of the measuring and test
equipment shall be maintained in accordance with MIL-STD- 45662.
4.2 Classification of Inspections. The examination and testing of items covered by this
specification shall be classified as follows:
a. Qualification inspection (See para. 4.3)
b. Acceptance inspection (See para. 4.4)
4.3 Qualification Inspection. Qualification inspection shall consist of all of the tests in Table I
performed in the order of listing.
4.3.1
Qualification Test Samples. Test samples submitted for qualification shall be
produced using equipment and procedures normally used in production. Test
samples shall be interconnected with MIL-STD-1553B data bus cable into data bus
networks in order that correct function of the components can be verified during
environmental exposure. Mating connectors shall be torqued to the specified value
and of the same environment resistance and finish as those on the components
under test.
© 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. TE Proprietary & Confidential Information.
If this document is printed, it becomes uncontrolled. Check for latest revision.
Page 7 of 14