H3LIS100DL Datasheet, PDF (30/38 Pages) STMicroelectronics – 8-bit data output

Register description
7.9
STATUS_REG (27h)
ZYXOR
ZOR
Table 35. STATUS_REG register
YOR
XOR
ZYXDA
ZDA
H3LIS100DL
YDA
XDA
ZYXOR
ZOR
YOR
XOR
ZYXDA
ZDA
YDA
XDA
Table 36. STATUS_REG description
X, Y and Z-axis data overrun. Default value: 0
(0: no overrun has occurred;
1: new data has overwritten the previous data before it was read)
Z-axis data overrun. Default value: 0
(0: no overrun has occurred;
1: new data for the Z-axis has overwritten the previous data)
Y-axis data overrun. Default value: 0
(0: no overrun has occurred;
1: new data for the Y-axis has overwritten the previous data)
X-axis data overrun. Default value: 0
(0: no overrun has occurred;
1: new data for the X-axis has overwritten the previous data)
X, Y and Z-axis new data available. Default value: 0
(0: a new set of data is not yet available; 1: a new set of data is available)
Z-axis new data available. Default value: 0
(0: new data for the Z-axis is not yet available;
1: new data for the Z-axis is available)
Y-axis new data available. Default value: 0
(0: new data for the Y-axis is not yet available;
1: new data for the Y-axis is available)
X-axis new data available. Default value: 0
(0: new data for the X-axis is not yet available;
1: new data for the X-axis is available)
7.10
OUT_X (29h)
X-axis acceleration data. The value is expressed as two’s complement.
7.11
OUT_Y (2Bh)
Y-axis acceleration data. The value is expressed as two’s complement.
7.12
OUT_Z (2Dh)
Z-axis acceleration data. The value is expressed as two’s complement.
30/38
DocID027504 Rev 2