H3LIS100DL Datasheet, PDF (23/38 Pages) STMicroelectronics – 8-bit data output

H3LIS100DL
Digital interfaces
5.2.3
SPI read in 3-wire mode
3-wire mode is entered by setting bit SIM (SPI serial interface mode selection) to ‘1’ in
CTRL_REG4.
Figure 11. SPI read protocol in 3-wire mode
&6
63&
6',2
5:
'2 '2 '2 '2 '2 '2 '2 '2
06 $' $' $' $' $' $'
The SPI read command is performed with 16 clock pulses:
bit 0: READ bit. The value is 1.
bit 1: MS bit. When 0, does not increment the address. When 1, increments the address in
multiple reads.
bit 2-7: address AD(5:0). This is the address field of the indexed register.
bit 8-15: data DO(7:0) (read mode). This is the data that is read from the device (MSB first).
The multiple read command is also available in 3-wire mode.
DocID027504 Rev 2
23/38
38