MB84VD23381HJ Datasheet, PDF (9/56 Pages) SPANSION – 64M (X16) FLASH MEMORY & 16M (X16) Mobile FCRAM

MBVD23381HJ-70
s ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Rating
Unit
Min
Max
Storage Temperature
Tstg
–55
+125
°C
Ambient Temperature with Power Applied
Voltage with Respect to Ground All pins
except RESET ,WP/ACC *¹
VCCf/VCCr Supply *¹
RESET *²
WP/ACC *³
TA
VIN, VOUT
VCCf,VCCr
VIN
VIN
–30
–0.3
–0.3
–0.5
–0.5
+85
°C
VCCf + 0.3
V
VCCr + 0.3
V
+3.3
V
+ 13.0
V
+10.5
V
*1: Minimum DC voltage on input or I/O pins is –0.3 V. During voltage transitions, input or I/O pins may undershoot
VSS to –1.0 V for periods of up to 5 ns. Maximum DC voltage on input or I/O pins is VCCf + 0.3 V or VCCr + 0.3 V.
During voltage transitions, input or I/O pins may overshoot to VCCf + 2.0 V or VCCr + 1.0 V for periods of up to 5 ns.
*2: Minimum DC input voltage on RESET pin is –0.5 V. During voltage transitions RESET pins may undershoot VSS
to –2.0 V for periods of up to 20 ns. Voltage difference between input and supply voltage (VIN-VCCf) does not
exceed +9.0 V. Maximum DC input voltage on RESET pins is +13.0 V which may overshoot to +14.0 V for periods
of up to 20 ns.
*3: Minimum DC input voltage on WP/ACC pin is –0.5 V. During voltage transitions, WP/ACC pin may undershoot
Vss to –2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is +10.5 V which may
overshoot to +12.0 V for periods of up to 20 ns, when VCCf is applied.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Value
Unit
Min
Max
Ambient Temperature
TA
–30
+85
°C
VCCf/VCCr Supply Voltages
VCCf, VCCr
+2.7
+3.1
V
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
Note: Operating ranges define those limits between which the functionality of the device is guaranteed.
8