LAN9221_12 Datasheet, PDF (117/151 Pages) SMSC Corporation – High-Performance 16-bit Non-PCI 10/100 Ethernet Controller with Variable Voltage I/O

High-Performance 16-bit Non-PCI 10/100 Ethernet Controller with Variable Voltage I/O
Datasheet
5.5
PHY Registers
The PHY registers are not memory mapped. These registers are accessed indirectly through the MAC
via the MII_ACC and MII_DATA registers. An index must be used to access individual PHY registers.
PHY Register Indexes are shown in Table 5.8, "LAN9221/LAN9221i PHY Control and Status Register".
Note: The NASR (Not Affected by Software Reset) designation is only applicable when bit 15 of
the PHY Basic Control Register (Reset) is set.
Table 5.8 LAN9221/LAN9221i PHY Control and Status Register
PHY CONTROL AND STATUS REGISTERS
INDEX
(IN DECIMAL)
0
1
2
3
4
5
6
17
18
27
29
30
31
REGISTER NAME
Basic Control Register
Basic Status Register
PHY Identifier 1
PHY Identifier 2
Auto-Negotiation Advertisement Register
Auto-Negotiation Link Partner Ability Register
Auto-Negotiation Expansion Register
Mode Control/Status Register
Special Modes Register
Special Control/Status Indications
Interrupt Source Register
Interrupt Mask Register
PHY Special Control/Status Register
SMSC LAN9221/LAN9221i
117
DATASHEET
Revision 2.9 (03-01-12)