SI8261AAC-C-IS Datasheet, PDF (39/40 Pages) Silicon Laboratories – 5 KV LED EMULATOR INPUT, 4.0 A ISOLATED GATE DRIVERS

DOCUMENT CHANGE LIST
Revision 0.9 to Revision 1.0
 Updated Table 2 on page 4.
 Added Figure 1 on page 7.
 Updated "3.1.Theory of Operation" on page 14.
 Updated Figures 11, 12, and 13 on page 16.
 Removed “5.5. Parametric Differences between
Si826x and HCPL-0302 and HCPL-3120 Opto
Drivers”.
Revision 1.0 to Revision 1.1
 Updated Figure 1 on page 7.
 Updated Ordering Guide Table 13 on page 23.
Removed references to moisture sensitivity levels from
table note.
Revision 1.1 to Revision 1.2
 Removed “Sampling” from Ordering Guide Table 13
on page 23.
Revision 1.2 to Revision 1.3
 Updated Table 3 on page 9.
Added CQC certificate numbers.
 Updated Table 5 on page 10.
Updated Rated Mains Voltage for 1000 V_RMS ratings.
 Updated Table 6 on page 10.
Removed V_IOSM specification.
 Updated Table 9 on page 13.
Replaced I_O with Peak Output Current I_OPK.
 Updated Figure 14 on page 17.
 Updated Figure 15 on page 17.
 Updated Figure 16 on page 18.
 Changed V_DD minimum throughout document to
reflect 6.5 V, not 5 V, as normal operation.
Si826x
Rev. 1.3
39