SI8261AAC-C-IS Datasheet, PDF (22/40 Pages) Silicon Laboratories – 5 KV LED EMULATOR INPUT, 4.0 A ISOLATED GATE DRIVERS

Si826x
7. Pin Descriptions (SDIP6)
ANODE 1
NC 2
e
CATHODE 3
6 VDD
UVLO
5 ^VO
4 GND
SDIP6
Industry Standard Pinout
Figure 20. Pin Configuration
Table 12. Pin Descriptions (SDIP6)
Pin Name
Description
1
ANODE Anode of LED emulator. V_O follows the signal applied to this input with respect to the
CATHODE input.
2
NC* No connect.
3 CATHODE Cathode of LED emulator. V_O follows the signal applied to ANODE with respect to this input.
4
GND External MOSFET source connection and ground reference for V_DD. This terminal is typically
connected to ground but may be tied to a negative or positive voltage.
5
V_O
Output signal.
6
V_DD Output-side power supply input referenced to GND (30 V max).
*Note: No Connect. These pins are not internally connected. To maximize CMTI performance, these pins should be
connected to the ground plane.
22
Rev. 1.3