R0E00008AKCE00EP63 Datasheet, PDF (97/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 4 Example of Emulator Connection
Notes: 1. Pins P33 to P35 are used by the emulator. Pull up and connect the emulator and MCU
pins.
User system
connector
Pins 1, 5, and 11
Vcc
4.7 kΩ
P33 to P35
MCU
Figure 4.3 Connection of Emulator and Pins P33 to P35
2. Pin P95 is used for forced break control by the emulator. Connect the emulator and
MCU pins directly.
User system
connector
Pin 7
Vcc
4.7 kΩ
P95
MCU
Figure 4.4 Connection of Emulator and Pin P95
Rev. 1.00 Aug. 03, 2009 Page 11 of 24
REJ10J2023-0100