R0E00008AKCE00EP63 Datasheet, PDF (93/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 3 Pin Assignments of the E8a Connector
Section 3 Pin Assignments of the E8a Connector
Figure 3.1 shows the pin assignments of the connector.
Pin 1 mark
Connector
Pin 2
Pin 1
Top view
Pin 1 mark
Pin 14
Pin 13
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
MCU Signal
P33
Vss
N.C. *2
Vss
P35
Vss
P95
Vcc
N.C. *2
Vss
P34
Vss
RES# *1
Vss
Notes:
1. The symbol # means that the signal is active-low.
Use of the internal oscillator circuit is available in the
H8/38524F. However, an external
clock input from pin OSC1 or OSC2 is necessary
when the emulator is connected.
2. These pins are not used in the H8/300L Super Low
Power series. Do not connect anything to these pins.
Figure 3.1 Pin Assignments of the Connector
Rev. 1.00 Aug. 03, 2009 Page 7 of 24
REJ10J2023-0100