R0E00008AKCE00EP63 Datasheet, PDF (72/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 4 Example of Emulator Connection
WARNING
In the power-supply mode, connect the emulator after
checking that the power-supply circuit on the user system is
not closed or the pin number assignments of the user system
connector is correct.
Failure to do so will result in a FIRE HAZARD and will
damage the host computer, the emulator, and the user
system.
7. Figure 4.6 shows the interface circuit in the E8a emulator. Use this figure as a
reference when determining the pull-up resistance value.
Rev. 1.00 Aug. 03, 2009 Page 12 of 26
REJ10J2023-0100