R0E00008AKCE00EP63 Datasheet, PDF (128/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCU (H8/38537F) and the Emulator
14. The emulator uses a two-word stack pointer for values stored on a user program break.
Therefore, the stack area must accept two-word addresses.
15. Do not use an MCU that has been used for debugging.
If the flash memory is rewritten many times, data may be lost due to retention problems after
the emulator has been left for a few days and the data will be erased. If an error message is
displayed, exchange the MCU for a new one.
Rev. 1.00 Aug. 03, 2009 Page 18 of 22
REJ10J2023-0100