R0E00008AKCE00EP63 Datasheet, PDF (106/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCU and the Emulator
15. Do not use an MCU that has been used for debugging.
If the flash memory is rewritten many times, data may be lost due to retention problems after
the emulator has been left for a few days and the data will be erased. If an error message is
displayed, exchange the MCU for a new one.
16. Use of the internal oscillator circuit is available in the H8S/38524F. However, an external
clock input from pin OSC1 or OSC2 is necessary when the emulator is connected.
17. Items Set in the [Configuration] Dialog Box
The emulator operation conditions are set in the [Configuration] dialog box.
Figure 5.4 [Configuration] Dialog Box ([System] Page)
Rev. 1.00 Aug. 03, 2009 Page 20 of 24
REJ10J2023-0100