R0E00008AKCE00EP63 Datasheet, PDF (81/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCUs and the Emulator
Table 5.3 Hardware Break Condition Specification Items
Items
Address bus condition
Data bus condition
Read or write condition
Description
Breaks when the MCU address bus value matches the
specified value.
Breaks when the MCU data bus value matches the specified
value. High or low byte or word can be specified as the
access data size.
Breaks in the read or write cycle.
Table 5.4 lists the combinations of conditions that can be set in the [Break condition]
dialog box.
Table 5.4 Conditions Set in [Break condition] Dialog Box
Condition
Dialog Box
Address Bus
Condition
Data Condition
[Break condition 1]
O
O
[Break condition 2]
O
O
[Break condition 3]
O
X
[Break condition 4]
O
X
Note: O: Can be set by checking the radio button in the dialog box.
Read or Write
Condition
O
O
X
X
Table 5.5 lists the combinations of conditions that can be set by the BREAKCONDITION_
SET command.
Table 5.5 Conditions Set by BREAKCONDITION_SET Command
Channel
Condition
Address Bus
Condition
(<addropt> option)
Data Condition
(<dataopt> option)
Break condition 1
O
O
Break condition 2
O
O
Break condition 3
O
X
Break condition 4
O
X
Note: O: Can be set by the BREAKCONDITION_SET command.
Read or Write
Condition
(<r/wopt> option)
O
O
X
X
Rev. 1.00 Aug. 03, 2009 Page 21 of 26
REJ10J2023-0100