R0E00008AKCE00EP63 Datasheet, PDF (130/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCU (H8/38537F) and the Emulator
Items that can be displayed in this dialog box are listed below.
[Device] combo box
Displays the MCU name.
[Emulation mode] combo box
Selects the emulation mode at user program execution.
Select Normal to perform normal emulation.
Select No break to disable PC breakpoint or break condition
settings during emulation.
[Step option] combo box
Sets the step interrupt option.
Disable interrupts during single step execution: Disables
interrupts^*1 during step execution.
Enable interrupts during single step execution: Enables
interrupts^*1 during step execution.
[User interface clock] combo
box
Displays the transfer clock of the user interface.
[Flash memory synchronization]
combo box
Selects whether or not the contents of the flash memory are
acquired by the emulator when the user program is stopped or
the position where the PC break is set is put back as the
original code.
When the flash memory is not programmed by the user
program, its contents need not be acquired by the emulator.
Rev. 1.00 Aug. 03, 2009 Page 20 of 22
REJ10J2023-0100