R0E00008AKCE00EP63 Datasheet, PDF (95/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 4 Example of Emulator Connection
Section 4 Example of Emulator Connection
The figures shown below are examples of connecting the user system to the emulator. The
H8/38524F incorporates a power-on reset circuit (hereafter referred to as POR). See figure 4.1
when you use the POR function or figure 4.2 when you do not use the POR function, respectively.
Pulled-up at 4.7 kΩ or more
Vcc
Vcc Vcc Vcc Vcc
Vcc
P95
P34
P35
P33
Vcc
P95
P34
P35
P33
MCU
RES#
Vss
RES#
Oscillator
circuit
OSC1 or OSC2
User system
Connector
14 pins with a 2.54-mm pitch
Figure 4.1 Example of Emulator Connection (when a POR is in Use)
Rev. 1.00 Aug. 03, 2009 Page 9 of 24
REJ10J2023-0100