R0E00008AKCE00EP63 Datasheet, PDF (108/158 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCU and the Emulator
[Step Over option] combo box
[Flash memory write after
download] group box
If there is no problem with the state that the program in the
flash memory has been replaced as the PC break code, the
position where the PC break is set needs not be put back as the
original code.
Disable: Read or program is not performed for the flash
memory except when the emulator is activated, the
flash memory area is modified, and the settings of
the PC break to the flash memory area are changed.
PC to flash memory: When the user program is stopped, the
specified PC break code is replaced as
the original instruction. Select this
option if there is a problem with the
state that the program in the flash
memory has been replaced as the PC
break code.
Flash memory to PC: When the user program is stopped, the
contents of the flash memory are read by
the emulator. Select this option if the
flash memory is reprogrammed by the
user program.
PC to flash memory, Flash memory to PC:
When the user program is stopped, the contents of the
flash memory are read by the emulator and the specified
PC break code is replaced as the original instruction.
Select this option if the flash memory is reprogrammed
by the user program and there is a problem with the state
that the program in the flash memory has been replaced
as the PC break code.
Enables or disables programming of the flash memory while
executing step operation.
Programming of the flash memory: Uses a software break for
step operation (e.g. Step Over) and enables programming of
the flash memory.
No Programming of the flash memory: Uses Break Condition
for step operation (e.g. Step Over) and disables programming
of the flash memory^*2.
Enables or disables programming of the flash memory after
downloading the program.
Disable: Disables programming of the flash memory after
downloading the program.
Enable: Enables programming of the flash memory after
downloading the program.
Rev. 1.00 Aug. 03, 2009 Page 22 of 24
REJ10J2023-0100