|
HB28K032MM3 Datasheet, PDF (26/91 Pages) Renesas Technology Corp – MultiMediaCard 32 MByte/64 MByte/128 MByte/256 MByte/512 MByte | |||
|
◁ |
HB28K032/L064/J128/J256/J512MM3, HB28K032/L064/J128/J256RM3
The command transmission always starts with the MSB. Each command starts with a start bit and ends
with a 7-bit CRC command protection field followed by an end bit. The length of each command frame is
fixed to 48 bits (2.4 µs at 20 MHz):
0
1
bit5...bit0 bit31...bit0
start bit host command argument
Note: 1. (Cyclic Redundancy Check)
bit6...bit0
CRC*1
1
end bit
The start bit is always â0â in command frames (sent from host to MultiMediaCard). The host bit is always
â1â for commands. The command field contains the binary coded command number. The argument
depends on the command (refer to Table âBasic Commands (class 0) and Table âBlock-Oriented Read
Commands (class 2)â). The CRC field is defined in Chapter âCyclic Redundancy Check (CRC)â.
Rev.0.02, Sep.15.2004, page 26 of 89
|
▷ |