HD64F3687GFPV Datasheet, PDF (220/538 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 13 Timer Z
Initial
Bit
Bit Name Value R/W Description
1
CMD1
0
R/W Combination Mode 1 and 0
0
CMD0
0
R/W 00: Channel 0 and channel 1 operate normally
01: Channel 0 and channel 1 are used together to
operate in reset synchronous PWM mode
10: Channel 0 and channel 1 are used together to
operate in complementary PWM mode (transferred at
the trough)
11: Channel 0 and channel 1 are used together to
operate in complementary PWM mode (transferred at
the crest)
Note: When reset synchronous PWM mode or
complementary PWM mode is selected by these
bits, this setting has the priority to the settings for
PWM mode by each bit in TPMR. Stop TCNT_0
and TCNT_1 before making settings for reset
synchronous PWM mode or complementary PWM
mode.
TCNT_0
TCNT_1
Normal phase
Active level
Counter phase
Initial
output
Active level
Reset synchronous PWM mode
Normal phase
Counter phase
Initial
output
Active level
Complementary PWM mode
Active level
Note: Write H'00 to TOCR to start initial outputs after stopping the counter.
Figure 13.4 Example of Outputs in Reset Synchronous PWM Mode
and Complementary PWM Mode
Rev.5.00 Nov. 02, 2005 Page 186 of 500
REJ09B0027-0500