PLC810PG Datasheet, PDF (4/26 Pages) Power Integrations, Inc. – Continuous Mode PFC & LLC Controller Continuous Mode PFC & LLC Controller

PLC810PG
FMAX
This pin is for programming maximum LLC frequency with a
resistor to VREF. If the frequency commanded by the FBL pin
current exceeds 95% of the programmed maximum frequency,
the LLC high and low side drivers turn both LLC MOSFETs off.
This pin must be decoupled to the GND pin with a 1 nF
capacitor.
RSVD1, RSVD2, and RSVD3
RSVD1 must be connected to VREF. RSVD2 and RSVD3 must
be connected to the GND pin.
VCOMP 1
GND 2
ISP 3
VREF 4
RSVD1 5
GATEP 6
VCC 7
GNDP 8
GNDL 9
GATEL 10
NC 11
GATEH 12
24 NC
23 FBP
22 ISL
21 FMAX
20 FBL
19 GND
18 RSVD3
17 RSVD2
16 VCCL
15 NC
14 HB
13 _VCCHB
Figure 2. Pin Numbering and Designation (Top View).
PI-5040-012709
4
Rev. F 08/09
www.powerint.com