PLC810PG Datasheet, PDF (24/26 Pages) Power Integrations, Inc. – Continuous Mode PFC & LLC Controller Continuous Mode PFC & LLC Controller

PLC810PG
PDIP-24 (0.300”)
Notes:
1. Package dimensions conform to JEDEC
specification MS-001.
2. Controlling dimensions are inches.
Dimensions in millimeters are in
24
13
B
parenthesis.
3. Dimensions shown do not include mold
flash or other protrusions. Mold flash or
protrusions
0.240 (6.10)
shall not exceed 0.006 (0.15) on any side.
4. A and B are reference datums on the
0.270 (6.86)
molded body. C is the datum at the seating
plane.
5. Dimensioning and tolerancing per ASME
Y14.5M-1994
1
12
1.240 (31.50)
1.260 (32.00)
0.055 (1.40)
0.065 (1.65)
0.015 (0.38) MIN
0.100 (2.54)
0.015 (0.38)
0.020 (0.51)
0.010 (0.25) M C A B
Figure 19. PDIP-24 Package Marking.
A
0.120 (3.05)
0.140 (3.56) C
0.115 (2.92)
0.150 (3.81)
0.300 (7.62)
0.325 (8.26)
0.009 (0.23)
0.012 (0.30)
0.300 (7.62)
0.310 (7.87)
0.400 (10.16)
PI-5181-110708
24
Rev. F 08/09
www.powerint.com