PLC18V8Z Datasheet, PDF (8/23 Pages) NXP Semiconductors – Zero standby power CMOS versatile PAL devices

Philips Semiconductors
Zero standby power
CMOS versatile PAL devices
Product specification
PLC18V8Z
ABSOLUTE MAXIMUM RATINGS¹
SYMBOL
PARAMETER
RATINGS
UNIT
V_CC
Supply voltage
V_CC
Operating supply voltage
–0.5 to +7
V_DC
4.5 to 5.5 (Industrial)
4.75 to 5.25 (Commercial)
V_DC
V_IN
V_OUT
∆t/∆V
Input voltage
Output voltage
Input/clock transition rise or fall²
–0.5 to V_CC + 0.5
–0.5 to V_CC + 0.5
250
V_DC
V_DC
ns/V maximum
I_IN
I_OUT
T_amb
Input currents
Output currents
Operating temperature range
–10 to +10
mA
+24
mA
–40 to +85 (Industrial)
0 to +75 (Commercial)
°C
T_stg
Storage temperature range
–65 to +150
°C
NOTE:
1. Stresses above those listed may cause malfunction or permanent damage to the device. This is a stress rating only. Functional operation at
these or any other condition above those indicated in the operational and programming specification of the device is not implied.
2. All digital circuits can oscillate or trigger prematurely when input rise and fall times are very long. When the input signal to a device is at or near
the switching threshold, noise on the line will be amplified and can cause oscillation which, if the frequency is low enough, can cause subsequent
stages to switch and give erroneous results. For this reason, Schmitt-triggers are recommended if rise/fall times are likely to exceed 250ns at
V_CC = 4.5V.
THERMAL RATINGS
TEMPERATURE
Maximum junction
Maximum ambient
Allowable thermal rise ambient to junction
150°C
75°C
75°C
VOLTAGE WAVEFORMS
+3.0V
0V
5ns
t_R t_F
90%
10%
5ns
AC TEST CONDITIONS
+3.0V
90%
C₁
C₂
INPUTS
V_CC +5V
S₁
R₁
I₀
B_Y
I₉
DUT
B_W
R₂
C_L
B_{X GND} BZ _OUTPUTS
10%
0V
5ns
5ns
MEASUREMENTS:
All circuit delays are measured at the +1.5V level of inputs and outputs,
unless otherwise specified.
Input Pulses
SP00017
NOTE:
C₁ and C₂ are to bypass V_CC to GND.
SP00006
1997 Aug 08
8