|
SAA7182A Datasheet, PDF (27/45 Pages) NXP Semiconductors – Digital Video Encoder EURO-DENC2 | |||
|
◁ |
Philips Semiconductors
Digital Video Encoder (EURO-DENC2)
Preliminary speciï¬cation
SAA7182A; SAA7183A
Table 33 Subaddress 73 to 75
DATA BYTE
DESCRIPTION
TTXHS
start of signal on pin TTXRQ (standard for 50 Hz ï¬eld rate = tbf)
values above 1715 (FISE = 1) or 1727 (FISE = 0) are not allowed
TTXHE
end of signal on pin TTXRQ (standard for 50 Hz ï¬eld rate = TTXHS + 1402)
values above 1715 (FISE = 1) or 1727 (FISE = 0) are not allowed
Table 34 Subaddress 76, 77 and 7C
DATA BYTE
DESCRIPTION
TTXOVS
ï¬rst line of occurrence of signal on pin TTXRQ in odd ï¬eld = TTXOVS + 1 (50 Hz ï¬eld rate)
TTXOVE
last line of occurrence of signal on pin TTXRQ in odd ï¬eld = TTXOVE (50 Hz ï¬eld rate)
Table 35 Subaddress 78, 79 and 7C
DATA BYTE
DESCRIPTION
TTXEVS
ï¬rst line of occurrence of signal on pin TTXRQ in even ï¬eld = TTXEVS + 1 (50 Hz ï¬eld rate)
TTXEVE
last line of occurrence of signal on pin TTXRQ in even ï¬eld = TTXEVE (50 Hz ï¬eld rate)
Table 36 Subaddress 7A to 7C
DATA BYTE
DESCRIPTION
FAL
ï¬rst active line = FAL + 4 for M-systems, = FAL + 1 for other systems, measured in lines
FAL = 0 coincides with the ï¬rst ï¬eld synchronization pulse
LAL
last active line = LAL + 3 for M-systems, = LAL for other system, measured in lines
LAL = 0 coincides with the ï¬rst ï¬eld synchronization pulse
Table 37 Subaddress 7A to 7C
DATA BYTE
DESCRIPTION
LINE
individual lines in both ï¬elds (PAL counting) can be disabled for insertion of teletext by the respective
bits, disabled line = LINExx (50 Hz ï¬eld rate)
this bit mask is effective only, if the lines are enabled by TTXOVS/TTXOVE and TTXEVS/TTXEVE
SUBADDRESSES
In subaddresses 5B, 5C, 5D, 5E and 62 all IRE values are rounded up.
1996 Oct 02
27
|
▷ |