MN673794 Datasheet, PDF (18/42 Pages) Panasonic Semiconductor – LSI FOR MPEG

MN673794
4. Color setting
Register name Address
apcerr2deg 0006h[12:8]
sekilmt
apcerr1deg
0006h[7:5]
0006h[4:0]
raccoff
000Ah[15]
racc
000Ah[14:8]
sacc
000Bh[15]
racc
rapcon
rphadj
000Bh[12:8]
000Ch[6]
000Ch[5:0]
Description
Used to set the gain of the APC frequency pull-in (loop filter first
term) (0 to 31)
00001: Large gain 00111: Default 01101: Small gain
Used to set the burst lock range of the APC block
000: Narrow 011: Default 100: Wide
Used to set the gain of the APC phase pull-in (loop filter zero term)
(0 to 31)
11000: Small gain 11100: Default 11110: Large gain
Used to set the On/Off of the FFACC (Digital feed forward ACC)
block
0: Off 1: On
Used to set the gain of the FFACC block
0: Default (72) Other than 0: racc[6:0]X2
Used to set the control DAC output of the FBACC (Analog feedback
ACC) block
0: Center fixed 1: Normal (error output)
Used to set the saturation (except burst) of the FFACC block
00000: Small 10000: Default 11111: Large
Used to set the hue compensation of the APC block
0: Off 1: On
Used to set the hue compensation of the APC block
100000: Large (-) 00000: Off 011111: Large (+)
Default
(Recommend
-ed value)
00111
(00101)
011
11100
0
0000000
1
(0)
10000
0
00000
5. Rec656 output
Register name Address
VideoOutsel 002Eh[1:0]
Description
Used to switch over the valid pixels of the Rec656 output signal to
blue or black background.
0X: Normal 10: Black background 11: Blue background
Default
(Recommend
-ed value)
00
SDF00032BEM
18