MN673794 Datasheet, PDF (16/42 Pages) Panasonic Semiconductor – LSI FOR MPEG

MN673794
1. Control system
Register name Address
cpsh
0000h[15]
fsinsel
0000h[13:12]
r656outsel
0000h[11]
sigmod
0000h[2:0]
pvs_pll_
sell
0004h[1:0]
tbcmod
0012h[1:0]
rpclamp[4:2] 0014h[4:2]
rpclamp[0]
clpreg[5:4]
agcreg1
[11:10]
SideLock
Sel
paravsep
pll
parajdet
pls
misfmv
0014h[0]
0025h[5:4]
0022h[11:10]
0003h[1]
0004h[5:2]
000Fh[13:12]
0020h[5:0]
tdir2516
0029h[3:1]
Description
Used to select the mode of the analog input processing block.
0: Component input 1: Composite input
Used to select the input of the frame sync block.
00: Analog input 01: Rec656 input 10: Test use 11: Not used
Used to select the input of the Rec656 output processing block.
0: Noise reduction output 1: Rec656 input
Used to set the signal modes of the analog input processing block,
frame sync processing block, Rec656 input processing block, and
Rec656 output processing block.
000: NTSC 001: PAL-M 010: NTSC443 011: PAL-60
100: - 101: PAL-N 110: -
111: PAL
Used to set the sync output of the sync separation block
00: Normal sync output mode 01: Prohibited
10: AFCV mode (pseudo V-AFC)
11: AFCV-still detection mode (pseudo V-AFC-still detection)
Used to set the mode of the TBC block
00: Normal (DD conversion + jitter correction + velocity error
correction)
01: Velocity error correction off (DD conversion + jitter correction)
10: Jitter correction / velocity error correction off (DD conversion
only)
11: Prohibited
Used to set the hold range of the DCLP (digital clamp) block (8 steps)
000: Thru 001: ±2 010: ±4 011: ±6
110: ±8 101: ±10 110: ±14 111: ±16
Used to set the operation of the DCLP (digital clamp) block
0: Off 1: On
Used to set the error output of the clamp control block
00: Center fixed 01:Max. fixed 10:Min. fixed 11: Normal
Used to set the error output of the AGC control block
00: Center fixed 01:Max. fixed 10:Min. fixed 11: Normal
Used to set the AFCH pseudo lock reset of the sync separation block
0: Not available 1: Available
AFCV response characteristics
Used to set the TBC sync separation
Used to set the lower limit of MV judgment level of the MV detection
block
Used to set the sync separation block
Default
(Recommended value)
1
00
0
000
11
(00)
00
000
(001)
1
11
11
0
1110
(0100)
11
(00)
100000
(100001)
000
(011)
SDF00032BEM
16