TCC-106 Datasheet, PDF (4/24 Pages) ON Semiconductor – Six-Output PTIC Control IC

TCC−106
Table 3. RECOMENDED OPERATING CONDITIONS
Rating
Symbol
Parameter
Min
Typ
Max
Unit
T_{AMB_OP}
T_{J_OP}
AVDD
Operating Ambient Temperature
Operating Junction Temperature
Analog Supply Voltage
−30
−
+85
°C
−30
−
+125
°C
2.3
−
5.5
V
VIO
IO Reference Supply Voltage
1.1
−
3.0
V
Table 4. DC CHARACTERISTICS (T_A = −30 to +85°C; V_OUTX = 15 V for each output; 2.3 V<AVDD< 5.5 V; 1.1 V<VIO<3.0 V; R_LOAD
= equivalent series load of 5.6 kohm and 2.7 nF; C_HV = 22 nF; L_BOOST = 15 mH; TRIG pin grounded; unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Unit
Comment
SHUTDOWN MODE
I_AVDD
I_{L_BOOST}
I_BATT
I_VIO
I_CLK
I_DATA
ACTIVE MODE
AVDD Supply Current
L_BOOST Leakage
Battery Current
VIO Supply Current
CLK Leakage
DATA Leakage
−
−
1.5
mA
−
−
1.5
−
−
2.5
−1
−
1
−1
−
1
−1
−
1
VIO Supply is Low
I_BATT
Average battery current, 3 outputs act-
−
ively switching 16 V for 1205 ms to 2 V
for 1705 ms to 8 V for 1705 ms and 3
outputs are @ 16 V steady state
1,760
2,350
mA
At VHV = 20 V
AVDD = 3.3 V
I_{BATT_SS0}
Average battery current, 6 outputs @
−
800
1,130
0 V steady state
At VHV = 20 V
AVDD = 3.3 V
I_{BAT_SS2}
Average battery current, 6 outputs @
−
850
1,200
mA
2 V steady state
At VHV = 20 V
AVDD = 3.3 V
I_{BATT_SS16}
Average battery current, 6 outputs @
16 V steady state
−
1,190
1,560
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST}
Average inductor current, 3 outputs ac-
−
tively switching 16 V for 1205 ms to 2 V
for 1705 ms to 8 V for 1705 ms and 3
outputs are @ 16 V steady state
1,480
2,050
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS0} Average inductor current, 6 outputs @
−
0 V steady state
500
790
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS2} Average inductor current, 6 outputs @
−
2 V steady state
560
850
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS16} Average inductor current, 6 outputs @
−
16 V steady state
930
1,270
At VHV = 20 V
AVDD = 3.3 V
I_{VIO_INACT}
I_{VIO_ACTIVE}
VIO average inactive current
VIO average active current
−
−
3
−
−
250
VIO is high, no bus activity
VIO = 1.8 V, master sending
data at 26 MHz
V_VREG
LOW POWER MODE
2.05
−
2.3
V
No external load allowed
I_AVDD
I_{L_BOOST}
I_BATT
I_VIO
V_VREG
AVDD Supply Current
L_BOOST Leakage
Battery Current
VIO Supply Current
−
−
−
−
−
−
−
−
2.0
−
8
mA
6
14
3
3.3
V
I_AVDD + I_{L_BOOST}
No bus activity
No external load allowed
www.onsemi.com
4