TCC-106 Datasheet, PDF (1/24 Pages) ON Semiconductor – Six-Output PTIC Control IC

TCC-106
Six-Output PTIC Control IC
Introduction
ON Semiconductor’s PTIC Controller IC is a six−output
high−voltage digital to analog control IC specifically designed to
control and bias ON Semiconductor’s Passive Tunable Integrated
Circuits (PTICs).
These tunable capacitive circuits are intended for use in mobile
phones and dedicated RF tuning applications. The implementation of
ON Semiconductor’s tunable circuits in mobile phones enables
significant improvement in terms of antenna radiated performance.
The tunable capacitors are controlled through a bias voltage ranging
from 2 V to 20 V. The TCC−106 high−voltage PTIC control IC has
been specifically designed to cover this need, providing six
independent high−voltage outputs that control up to six different
tunable PTICs in parallel. The device is fully controlled through a
multi−protocol digital interface.
Key Features
• Controls ON Semiconductor’s PTIC Tunable Capacitors
• Compliant with Timing Needs of Cellular and Other Wireless System
Requirements
• Integrated Boost Converter with 6 Programmable Outputs
(up to 24 V)
• Low Power Consumption
• Auto−detection of SPI (30− or 32−bit) or MIPI RFFE Interfaces
(1.2 V or 1.8 V)
• Available in WLCSP (RDL ball arrays) and for Stand−alone or
Module Integration
• This is a Pb−Free Device
Typical Applications
• Multi−band, Multi−standard, Advanced and Simple Mobile Phones
• Tunable Antenna Matching Networks
• Compatible with Closed−loop and Open−loop Antenna Tuner
Applications
www.onsemi.com
RDL Ball Array
CASE 567HL
MARKING DIAGRAM
TC6x
ALYW
RDL
TC6 = Product Code
x
= MIPI ID
A
= Assembly Location
L
= Wafer Lot Code
Y
= Year Code
W
= Week Code
O
= Pin 1 Marker
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 23 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
September, 2015 − Rev. 5
Publication Order Number:
TCC−106/D