AMIS-30522 Datasheet, PDF (29/29 Pages) AMI SEMICONDUCTOR – Micro-stepping Motor Driver

AMIS-30522
12.0 Document History
Table 35: Revision History
Revision
Date
0.1
18-Jan-06
0.2
24-Jan-06
0.3
9-Feb-06
0.4
9-Mar-06
0.5
22-Mar-06
0.6
24-May-06
1.0
6-June-07
2.0
3-July-08
Modification
Initial draft
Draft: changed PWM description, added SLA pin description, changed POR and WD paragraphs.
CEN->CENB, NXT pin timing, SPI I/F, 30522 section 8.5, 8.6,8.7, 30522 section 8.4,8.5
Updated pin-out & added drawing, CENB->CLR, ERR->ERRB, removed SWP bits, updated SPI bits, added
package details
Renamed CS -> CSB, Swapped pins CLR and CSB
Updated pins, AC&DC tables, SLA specs, SM[2:0] decoding
Final version derived from common 30521/30522 datasheet
Move content into ON Semiconductor template; update OPN table, AC&DC tables, Application Schematic,
SPI interface, SPI registers, Timing NXT
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”
parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the
rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or
use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action
Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: [phone] or 800-344-3860 Toll Free USA/Canada
Fax: [phone] or 800-344-3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800-282-9855
Toll Free USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: [phone]
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
Rev. 2 | Page 29 of 29 | www.onsemi.com