TCC-202 Datasheet, PDF (21/23 Pages) ON Semiconductor – Two-Output PTIC Control IC

TCC−202
Following picture shows TCC−202 and all the necessary external components
C_VDDA
V_BATT ^IBATT
R_FILT
C_BOOST
V_IO
I_VIO
C_VIO
I_VDDA
L_BOOST
I_IND
D_SCH
VDDA
VIO
L_BOOST
TCC−2x2
VHV
VREG
OUT_A,B
C_HV
C _DACA,B
C_VREG
Figure 16. TCC−202 with External Components
Table 23. RECOMMENDED EXTERNAL BOM
Component
Function
Min Typ Max
Unit
Package
C_VDDA
C_VIO
C_BOOST
C_HV
R_FILT
L_BOOST
C_VREG
C_DACA,B
D_SCH
Analog supply decoupling capacitor
VIO supply decoupling capacitor
Boost supply capacitor
Storage/filtering capacitor for the high voltage
Decoupling/filtering resistor for the Vbatt note*
Boost inductor (Note 15)
Regulator decoupling cap
RF decoupling cap (Note 16)*
Rectifying Shottky diode (Note 17)
1
mF
0402
100
nF
0201
1
mF
0402
47
nF
0402
3.3
W
0603
15
mH
0603
220
nF
0201
100
pF
0201
SOD−923/
SOD−323
*Should be 50 V compliant.
15. The following inductor should be used: TDK VLS2010ET−150M or equivalent
16. Recommended in noise reduction only− not essential but place next to PTIC if used
17. The NSR0240P2T5G diode from ON Semiconductor and the Sunlord SPH201610H150MT are recommended. The NSR0340HT1G and
NSR0340P2T5G devices may also be used.
Table 24. ORDERING INFORMATION
Device
Package
Shipping^†
TCC−202A−RT
RDL
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
21