TCC-202 Datasheet, PDF (1/23 Pages) ON Semiconductor – Two-Output PTIC Control IC

TCC-202
Two-Output PTIC Control IC
Introduction
TCC−202 is a two−output high−voltage digital to analog control IC
specifically designed to control and bias ON Semiconductor’s Passive
Tunable Integrated Circuits (PTICs).
These tunable capacitor control circuits are intended for use in
mobile phones and dedicated RF tuning applications. The
implementation of ON Semiconductor’s tunable circuits in mobile
phones enables significant improvement in terms of antenna radiated
performance.
The tunable capacitors are controlled through a bias voltage ranging
from 1 V to 24 V. The TCC−202 high−voltage PTIC control IC has
been specifically designed to cover this need, providing two
independent high−voltage outputs that control up to two different
tunable PTICs in parallel. The device is fully controlled through a
MIPI interface.
Key Features
• Controls ON Semiconductor’s PTIC Tunable Capacitors
• Compliant with Timing Needs of Cellular and Other Wireless System
Requirements
• Integrated Boost Converter with 2 Programmable DAC Outputs
(up to 24 V)
• Low Power Consumption
• MIPI−RFFE Interface
• Compliant with MIPI 26 MHz Read−back
• Available in WLCSP (RDL ball arrays)
• This is a Pb−Free Device
Typical Applications
• Multi−band, Multi−standard, Advanced and Simple Mobile Phones
• Tunable Antenna Matching Networks
• Compatible with Closed−loop and Open−loop Antenna Tuner
Applications
www.onsemi.com
WLCSP12
CASE 567KZ
MARKING DIAGRAM
XXXX
ALYW
G
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information on page 21 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
November, 2015 − Rev. 2
Publication Order Number:
TCC−202/D