TCC-202 Datasheet, PDF (16/23 Pages) ON Semiconductor – Two-Output PTIC Control IC

TCC−202
Register RFFE:
RFFE_PRODUCT_ID_0x1D
Reset Source: N/A
7
6
5
4
Bits
PID7
PID6
PID5
PID4
Reset
0
0
1
0
Bits [7:1] are hardcoded in ASIC
Bits [0] can be programmed in OTP during manufacturing
Register RFFE:
Reset Source: N/A
7
Bits
MPN7
Reset
0
RFFE_MANUFACTURER_ID_0x1E
6
MPN6
0
5
MPN5
1
4
MPN4
0
Address RFFE A[4:0]:
3
PID3
0
2
PID2
0
1
PID1
0
Address RFFE A[4:0]:
3
MPN3
1
2
MPN2
1
1
MPN1
1
0x1D
0
PID0 (1)
OTP[4]
0x1E
0
MPN0
0
Register RFFE:
RFFE_USID_0x1F
Address RFFE A[4:0]:
0x1F
Reset Source: nreset_dig or PWR_MODE = ‘01’ (transition through STARTUP mode)
7
6
5
4
3
2
1
0
Bits
Reserved (2)
MPN9 (2)
MPN8 (2) USID3 (1) USID2 (1) USID1 (1)
USID0 (1)
Reset
0
0
0
1
W−0
W−1
W−1
W−1
USID = Unique Slave Identifier Register
1. USID field can be changed by:
• MIPI−RFFE broadcast messages when USID field within the Register Write Command is 0b0000
• MIPI−RFFE individual messages when USID field within the Register Write Command equal with content of
RFFE_REG_0x1F[3:0]
2. In the sequence of writing USID field, the upper [7:4] must match the value 0b0001 hardcoded in the RFFE register
0x1F
NOTE: USID value is NOT retained during SHUTDOWN power mode.
NOTE: USID value is not affected by SWR bit from RFFE_STATUS register.
www.onsemi.com
16