English
Language : 

DS92LV2421_11 Datasheet, PDF (9/40 Pages) National Semiconductor (TI) – 10 to 75 MHz, 24-bit Channel Link II Serializer and Deserializer
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage – VDDn (1.8V)
Supply Voltage – VDDIO
LVCMOS I/O Voltage
Receiver Input Voltage
Driver Output Voltage
Junction Temperature
Storage Temperature
48L LLP Package
Maximum Power Dissipation
Capacity at 25°C
Derate above 25°C
 θJA (with 9 thermal via)
 θJC (with 9 thermal via)
60L LLP Package
Maximum Power Dissipation
Capacity at 25°C
Derate above 25°C
 θJA (with 9 thermal via)
 θJC (with 9 thermal via)
ESD Rating (HBM)
ESD Rating (CDM)
ESD Rating (MM)
−0.3V to +2.5V
−0.3V to +4.0V
−0.3V to (VDDIO + 0.3V)
−0.3V to (VDD + 0.3V)
−0.3V to (VDD + 0.3V)
+150°C
−65°C to +150°C
225 mW
1/ θJA mW / °C
27.1 °C/W
4.5 °C/W
525 mW
1/ θJA mW / °C
24.6 °C/W
2.8 °C/W
≥±8 kV
≥±1 kV
≥±250 V
ESD Rating (IEC 61000–4–2),
RD = 330Ω, CS = 150pF
Air Discharge (DOUT+, DOUT- )
≥±25kV
Contact Discharge (DOUT+,
DOUT- )
≥±8kV
Air Discharge (RIN+, RIN- )
≥±25kV
Contact Discharge (RIN+, RIN- )
≥±8kV
For soldering specifications:
see product folder at www.national.com and
www.national.com/ms/MS/MS-SOLDERING.pdf
Recommended Operating
Conditions
Supply Voltage (VDDn)
LVCMOS Supply
Voltage (VDDIO)
OR
LVCMOS Supply
Voltage (VDDIO)
Operating Free Air
Temperature (TA)
Clock Frequency
Supply Noise (Note 10)
Min
1.71
1.71
3.0
−40
10
Nom
1.8
1.8
3.3
+25
Max
1.89
1.89
3.6
+85
75
50
Units
V
V
V
°C
MHz
mVP-P
Serializer DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified. (Note 2, Note 3, Note 4)
Symbol
Parameter
Conditions
Pin/Freq.
Min
Typ Max
LVCMOS INPUT DC SPECIFICATIONS
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
IIN
Input Current
VDDIO = 3.0 to 3.6V
2.2
VDDIO
VDDIO = 1.71 to 1.89V
VDDIO = 3.0 to 3.6V
VDDIO = 1.71 to 1.89V
DI[23:0],
CI1,CI2,CI3,
CLKIN, PDB,
VODSEL,
RFB,
0.65*
VDDIO
GND
GND
VDDIO
0.8
0.35*
VDDIO
VDDIO = 3.0 BISTEN,
−15
±1
+15
VIN = 0V or VDDIO
to 3.6V
CONFIG[1:0]
VDDIO = 1.7
−15
±1
+15
to 1.89V
Units
V
V
V
V
μA
μA
9
www.national.com