DS50PCI401 Datasheet, PDF (18/32 Pages) National Semiconductor (TI) – 2.5 Gbps / 5.0 Gbps 4 Lane PCI Express Transceiver with Equalization and De-Emphasis

Write 32'h to address 0x47.
The following IDLE status should be observable on the ex-
ternal pins:
pin 19 – CH0 with CH2,
pin 20 – CH1 with CH3,
pin 46 – CH4 with CH6,
pin 47 – CH5 with CH7.
Pin = HIGH (VDD) means IDLE is detected (no signal
present).
Pin = LOW (GND) means ACTIVE (data signal present).
To monitor the RATE detect with two channels ORed (CH0
with CH2, CH1 with CH3, CH4 with CH6, CH5 with CH7):
Write C0'h to address 0x4C.
The following RATE status should be observable on the ex-
ternal pins:
pin 19 – CH0 with CH2,
pin 20 – CH1 with CH3,
pin 46 – CH4 with CH6,
pin 47 – CH5 with CH7.
Pin = HIGH (VDD) means high data rate is detected (6 Gbps).
Pin = LOW (GND) means low rate is detected (3 Gbps).
www.national.com
18