N25Q256A11ESF40F Datasheet, PDF (87/87 Pages) Micron Technology – Micron Serial NOR Flash Memory

1.8V, 256Mb: Multiple I/O Serial Flash Memory
Revision History
Revision History
Rev. G, Production – 02/12
• Added W# information to the WRITE STATUS REGISTER command section
Rev. F, Production – 02/12
• Added deep power-down to AC Reset specifications
Rev. E, Production – 01/12
• Updated DUAL INPUT/OUTPUT FAST READ – DTR third code and added note 11;
added note 12 to QUAD INPUT/OUTPUT FAST READ – DTR in the Command Set ta-
ble
• Updated V_WI min and max specs in the Power-Up Timing and V_WI Threshold table
Rev. D, Production – 09/11
• Micron rebrand
Rev. C – 11/10
• Added Reset Enable; Read Extended Address Register, Dual I/O; Reset Enable and Re-
set Memory, Dual I/O; Read Extended Address Register, Quad I/O; Reset Enable and
Reset Memory, Quad I/O
Rev. B – 08/10
• Added information to clarify 4-Byte Address Mode; added reset information, includ-
ing the Reset Enable figure and new rows in the Reset Conditions table
Rev. A – 06/10
• Initial release
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: [phone]
www.micron.com/productsupport Customer Comment Line: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
PDF: 09005aef846a804a
n25q_256mb_1_8V_65nm.pdf - Rev. G 2/2012 EN
87
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.