PIC16F1934_11 Datasheet, PDF (390/472 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

PIC16(L)F1934/6/7
30.4 DC Characteristics: PIC16(L)F1934/6/7-I/E (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym.
Characteristic
Min.
Typ†
Max. Units
Conditions
D102
D102A
*
†
Note 1:
2:
3:
4:
VCAP Capacitor Charging
Charging current
—
200
—
A
Source/sink capability when
—
0.0
—
mA
charging complete
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external
clock in RC mode.
Negative current is defined as current sourced by the pin.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
Including OSC2 in CLKOUT mode.
DS41364E-page 390
 2008-2011 Microchip Technology Inc.