PIC16F1934_11 Datasheet, PDF (386/472 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

PIC16(L)F1934/6/7
30.2 DC Characteristics: PIC16(L)F1934/6/7-I/E (Industrial, Extended) (Continued)
PIC16LF1934/36/37
PIC16F1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D017
—
110
180
A
—
140
250
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode}
D017
—
150
250
A
—
210
330
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode (Note 5)}
—
270
430
A
5.0
D018
—
1.0
1.4
mA
1.8 FOSC = 8 MHz
—
1.8
2.3
mA
3.0 ^{HFINTOSC mode}
D018
—
1.0
1.5
mA
1.8 FOSC = 8 MHz
—
1.8
2.3
mA
3.0 ^{HFINTOSC mode (Note 5)}
—
2.0
2.8
mA
5.0
D019
—
1.5
2.2
mA
1.8 FOSC = 16 MHz
—
2.8
3.7
mA
3.0 ^{HFINTOSC mode}
D019
—
1.7
2.3
mA
1.8 FOSC = 16 MHz
—
2.9
3.9
mA
3.0 ^{HFINTOSC mode (Note 5)}
—
3.1
4.1
mA
5.0
D020
—
4.8
6.2
mA
3.0 FOSC = 32 MHz
—
5.0
7.5
mA
3.6 ^{HFINTOSC mode}
D020
—
4.8
6.5
mA
3.0 FOSC = 32 MHz
—
5.0
7.5
mA
5.0 ^{HFINTOSC mode}
D021
—
410
550
A
—
710
990
A
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3)}
D021
—
430
700
A
—
730 1100
A
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3, Note 5)}
—
860 1400
A
5.0
D022
—
5.0
6.2
mA
3.0 FOSC = 32 MHz
—
6.0
7.5
mA
3.6 ^{HS Oscillator mode (Note 6)}
D022
—
5.0
6.5
mA
3.0 FOSC = 32 MHz
—
5.2
7.5
mA
5.0 ^{HS Oscillator mode (Note 5, Note 6)}
Note 1:
2:
3:
4:
5:
6:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
FVR and BOR are disabled.
0.1 F capacitor on VCAP (RA0).
8 MHz crystal oscillator with 4x PLL enabled.
DS41364E-page 386
 2008-2011 Microchip Technology Inc.