PIC16F1934_11 Datasheet, PDF (384/472 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

PIC16(L)F1934/6/7
30.2 DC Characteristics: PIC16(L)F1934/6/7-I/E (Industrial, Extended)
PIC16LF1934/36/37
PIC16F1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D009 ^{LDO Regulator}
—
350
—
A
— HS, EC OR INTOSC/INTOSCIO (8-16 MHZ)
Clock modes with all VCAP pins disabled
—
50
—
A
— All VCAP pins disabled
—
30
—
A
— VCAP enabled on RA0, RA5 or RA6
—
5
—
A
— LP Clock mode and Sleep (requires FVR and
BOR to be disabled)
D010
—
7.0
16
A
1.8 FOSC = 32 kHz
—
9.0
20
A
3.0 ^{LP Oscillator mode (Note 4),}
-40°C  TA  +85°C
D010
—
29
63
A
1.8 FOSC = 32 kHz
—
37
74
A
3.0 ^{LP Oscillator mode (Note 4, 5),}
-40°C  TA  +85°C
—
40
79
A
5.0
D010A
D010A
—
7.0
23
A
1.8 FOSC = 32 kHz
—
9.0
27
A
3.0 ^{LP Oscillator mode (Note 4)}
-40°C  TA  +125°C
—
29
68
A
1.8 FOSC = 32 kHz
—
37
88
A
3.0 ^{LP Oscillator mode (Note 4, 5)}
-40°C  TA  +125°C
—
40
95
A
5.0
D011
—
140
200
A
—
250
330
A
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode}
D011
—
160
260
A
—
280
480
A
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode (Note 5)}
—
390
690
A
5.0
D012
—
430
650
A
—
750 1000
A
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode}
D012
—
450
700
A
—
770 ₁₁₀₀
A
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode (Note 5)}
—
930 1300
A
5.0
Note 1:
2:
3:
4:
5:
6:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
FVR and BOR are disabled.
0.1 F capacitor on VCAP (RA0).
8 MHz crystal oscillator with 4x PLL enabled.
DS41364E-page 384
 2008-2011 Microchip Technology Inc.