PIC16F1934_11 Datasheet, PDF (385/472 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

PIC16(L)F1934/6/7
30.2 DC Characteristics: PIC16(L)F1934/6/7-I/E (Industrial, Extended) (Continued)
PIC16LF1934/36/37
PIC16F1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D013
—
50
100
A
1.8 FOSC = 500 kHz
—
85
150
A
3.0 ^{EC Oscillator Low-Power mode}
D013
—
70
120
A
—
115
170
A
1.8 FOSC = 500 kHz
3.0 ^{EC Oscillator Low-Power mode (Note 5)}
—
120
200
A
5.0
D014
—
400
550
A
—
700 1100
A
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode}
Medium Power mode
D014
—
430
650
A
—
720 1000
A
—
850 1200
A
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode (Note 5)}
5.0 ^{Medium Power mode}
D015
—
5.3
6.2
mA
3.0 FOSC = 32 MHz
—
6.3
7.5
mA
3.6 ^{EC Oscillator High-Power mode}
D015
—
5.3
6.5
mA
3.0 FOSC = 32 MHz
—
5.4
7.5
mA
5.0 ^{EC Oscillator High-Power mode (Note 5)}
D016
—
5
12
A
1.8 FOSC = 32 kHz, LFINTOSC mode (Note 4)
—
8
16
A
3.0 ^{-40°C  TA  +85°C}
D016
—
27
70
A
1.8 FOSC = 32 kHz, LFINTOSC mode
—
34
80
A
3.0 ^{(Note 4, Note 5)}
-40°C  TA  +85°C
—
36
90
A
5.0
Note 1:
2:
3:
4:
5:
6:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
FVR and BOR are disabled.
0.1 F capacitor on VCAP (RA0).
8 MHz crystal oscillator with 4x PLL enabled.
 2008-2011 Microchip Technology Inc.
DS41364E-page 385