PIC18F23K20_10 Datasheet, PDF (372/456 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC18F2XK20/4XK20
26.3 DC Characteristics: RC Run Supply Current, PIC18F2XK20/4XK20
PIC18F2XK20/4XK20
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ
Max Units
Conditions
D008 Supply Current (IDD)^{(1, 2)} 5.5 9 A
6.0 10 A
6.5 14 A
9.0 30 A
D008A
10.0 15 A
10.5 16 A
11.0 20 A
-40°C
+25°C
+85°C
+125°C
-40°C
+25°C
+85°C
VDD = 1.8V
VDD = 3.0V
FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC source)
14.0 40 A
+125°C
D009
D009A
0.40 0.50 mA -40°C TO +125°C
0.60 0.80 mA -40°C TO +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 1 MHz
(RC_RUN mode,
HF-INTOSC source)
D010
D010A
2.2 3.0 mA -40°C TO +125°C VDD = 1.8V
FOSC = 16 MHz
(RC_RUN mode,
3.8 4.4 mA -40°C TO +125°C VDD = 3.0V _{HF-INTOSC source)}
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and
temperature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
DS41303G-page 372
 2010 Microchip Technology Inc.