804-R010-330 Datasheet, PDF (3/32 Pages) Magnetrol International, Inc. – Kotron® Sentinel II Model 804 RF Level Transmitter

Kotron Model 804 Sentinel II
RF Level Transmitter
Table of Contents
1.0 Description
1.1 Principle of Operation ..............................................1
1.2 Unpacking ................................................................1
1.3 Connecting Cable .....................................................2
2.0 Installation
2.1 Installation Location .................................................2
2.2 Mounting..................................................................3
2.2.1 Mounting Procedure ......................................3
2.2.2 Integral Mount with Standard Rigid Probe ....3
2.2.3 Integral Mount with Flexible Probe................4
2.2.4 Remote Mount with Standard Rigid Probe ....5
2.2.4.1 Remote Mount with Standard
Rigid Probe .............................................5
2.2.4.2 Preamplifier.............................................6
2.2.5 Remote Mount with Flexible Probe................7
2.2.5.1 Main amplifier ........................................7
2.2.5.2 Preamplifier.............................................7
2.3 Electrostatic Discharge (ESD) Handling Procedure...9
2.4 Wiring ......................................................................9
2.4.1 Wiring Power Supply Board ...........................9
2.4.1.1 Power wiring ...........................................9
2.4.1.2 Discrete output wiring ............................9
2.4.2 Wiring Operation .........................................10
2.4.2.1 4–20 mA output wiring ........................10
2.4.2.2 Active or passive selection .....................10
2.4.2.3 RS-485 output ......................................10
2.4.2.4 Manual self-test.....................................11
2.5 Unit Configuration .................................................11
2.5.1 General Configuration Instructions..............11
2.5.2 Password.......................................................11
2.5.3 Operator Keypad..........................................11
2.5.4 QuickCal......................................................12
2.5.5 General Programming Menus.......................13
2.5.6 Measured Value Menu..................................14
2.5.7 System Configuration Menu ........................14
2.5.8 I/O Configuration Menu .............................16
2.5.8.1 Discrete output settings.........................16
2.5.8.2 Setting 4–20 mA and
communications output ........................17
2.5.9 Advanced Configuration Menu ....................18
2.5.10 Diagnostics Menu ........................................19
3.0 Reference Information
3.1 Troubleshooting ......................................................20
3.1.1 Test Relays....................................................20
3.1.2 Test 4–20 Output.........................................20
3.1.3 Signal Values ................................................20
3.1.3.1 CCO int. cap ........................................20
3.1.3.2 Open probe...........................................20
3.1.3.3 CCO probe...........................................20
3.1.4 View Version # .............................................21
3.1.5 Factory Presets..............................................21
3.1.6 Troubleshooting Procedures .........................21
3.2 Agency Approvals....................................................22
3.2.1 Agency Specifications – Intrinsically
Safe Installation (FM/CSA).....................................23
3.3 Specifications ..........................................................24
3.3.1 Electrical ......................................................24
3.3.2 Dimensional.................................................25
3.4 Replacement Parts...................................................27
3.4.1 Replacement Parts ........................................27
3.5 Model Numbers......................................................28
3.5.1 Transmitter ...................................................28